3.6 H.P.

SPECIFICATIONS

NO IMAGE

№	Артикул	Наименование	Деталей в узле	Комментарий	Цена
-	-	HORSEPOWER		3.6 B.I.A. CERTIFIED BRAKE H.P. AT 4500 R.P.M.
-	-	TRANSOM HEIGHT		15" OR 20", DEPENDING ON MODEL.
-	-	COOLING SYSTEM		AIR COOLED POWERHEAD. WATER COOLED MOTOR LEG.
-	-	гребной винт		ALUMINUM, DIAMETER 7 - 1/2", PITCH 4 - 1/2" LEFT HAND ROTATION.
-	-	PROPELLER SHAFT AND DRIVESHAFT		STAINLESS STEEL, HARDENED GROUND AND POLISHED.
-	-	топливный бак		PRESSED ALUMINUM TANK, CAPACITY 7 U.S. PINTS.
-	-	Коленчатый вал		MOLDED NODULAR IRON, GROUND FINISH.
-	-	шатун		SPECIAL ALUMINUM DIE CAST WITH CAST-IN BRONZE BEARINGS.
-	-	Топливная система		FLOAT FEED CARBURETOR.
-	-	PISTON DISPLACEMENT		5.18 CUBIC INCHES.
-	-	BORE AND STROKE		2 - 1/16" BORE X 1 - 9/16" STROKE.
-	-	ENGINE		TWO-CYCLE, SINGLE CYLINDER.
-	-	WEIGHT		33 POUNDS FOR SHORT SHAFT MODEL.

-	Art.: - HORSEPOWER (3.6 B.I.A. CERTIFIED BRAKE H.P. AT 4500 R.P.M.) Деталей в узле:
-	Art.: - TRANSOM HEIGHT (15" OR 20", DEPENDING ON MODEL.) Деталей в узле:
-	Art.: - COOLING SYSTEM (AIR COOLED POWERHEAD. WATER COOLED MOTOR LEG.) Деталей в узле:
-	Art.: - гребной винт (ALUMINUM, DIAMETER 7 - 1/2", PITCH 4 - 1/2" LEFT HAND ROTATION.) Деталей в узле:
-	Art.: - PROPELLER SHAFT AND DRIVESHAFT (STAINLESS STEEL, HARDENED GROUND AND POLISHED.) Деталей в узле:
-	Art.: - топливный бак (PRESSED ALUMINUM TANK, CAPACITY 7 U.S. PINTS.) Деталей в узле:
-	Art.: - Коленчатый вал (MOLDED NODULAR IRON, GROUND FINISH.) Деталей в узле:
-	Art.: - шатун (SPECIAL ALUMINUM DIE CAST WITH CAST-IN BRONZE BEARINGS.) Деталей в узле:
-	Art.: - Топливная система (FLOAT FEED CARBURETOR.) Деталей в узле:
-	Art.: - PISTON DISPLACEMENT (5.18 CUBIC INCHES.) Деталей в узле:
-	Art.: - BORE AND STROKE (2 - 1/16" BORE X 1 - 9/16" STROKE.) Деталей в узле:
-	Art.: - ENGINE (TWO-CYCLE, SINGLE CYLINDER.) Деталей в узле:
-	Art.: - WEIGHT (33 POUNDS FOR SHORT SHAFT MODEL.) Деталей в узле: